Új hozzászólás Aktív témák

• #9314 d1abLo senior tag whYz #9290

  Új Válasz 2013-12-11 14:37:49 #9314

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  d1abLo

  senior tag

  válasz whYz #9290 üzenetére

  keverőpult. vagy esetleg ezzel a házi megoldással (itt 3 gép hangját eggyesíti egy negyedikre)

  For laughs, I put this together from that schematic. This $15 project might be within your Geekiness:

  4 x Stereo mini-plugs, with 6' wire @ $2.70 each
  link

  6 x 10k, 1/4W, 5% resistor
  link

  We will make a cable to combine the stereo output from 3 PCs, and feed it into your 4th PC as "Aux In". From there it would mix with sound from your 4th PC, and be available in your headphones.

  Look at the plug-and-wire picture at the link. Click on the picture to enlarge it. You see a red wire, a black wire of the same thickness, and a thicker black wire (that we will now call the "shield").

  Step 1) Take one of the stereo min-plugs and wire assemblies, and mark it "Output".

  Step 2) Take the OTHER three plugs and connect one resistor (doesn't matter which end) to each red wire and each black wire (not the "shield"). Cover the connection from wire up to the resistor body with electrical tape. We now have 3 Red and 3 Black wires that end with a bare resistor lead.

  Step 3) Join the 3 Red wires with resistors attached by twisting the open leads from their resistors together. Then connect the Red wire from the output plug (Step 1) to the joined resistors. Cover this entire connection, including resistor bodies, with black electrical tape.

  Step 4) Repeat Step 3 using the Black wires with resistors.

  Step 5) Connect the 4 Shield wires together, and cover with electrical tape.

  Done. Plug the one you labeled "Output" into the Input Jack on the PC that has your headphones, plug the others into the Output Jacks of your other PCS. $15, enjoy.

  You can also wrap aluminum foil around the part of your new cable that is electrical tape, shielding it. Then wrap the aluminum foil with electrical tape to protect the shield.

  [ Szerkesztve ]

  Flash 4 president : http://wiki.teamliquid.net/starcraft/Flash

Új hozzászólás Aktív témák