Új hozzászólás Aktív témák

• #488 Simi121 aktív tag töky12 #487

  Új Válasz 2006-12-29 20:59:39 #488

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  Simi121

  aktív tag

  válasz töky12 #487 üzenetére

  DD-WRT Hardware Support Notes
  -----------------------------
  Note: Please read the flashing notes relevant to your hardware.
  
  1.) DD-WRT supported/tested router hardware versions
  Router: Serial Number prefixes:
  Linksys WRT54G 1.0 CDF0xxx or CDF1xxx
  Linksys WRT54G 1.1 CDF2xxx or CDF3xxx
  Linksys WRT54G 2.0 CDF5xxx
  Linksys WRT54G 2.2 CDF7xxx
  Linksys WRT54G 3.0 CDF8xxx
  Linksys WRT54G 3.1 CDF9xxx
  Linksys WRT54G 4.0 CDFAxxx
  Linksys WRT54G 5.0 (JTAG only with cfe update, see http://wrt-wiki.bsr-clan.de/index.php?title=Flash_Your_Version_5_WRT54G)
  Linksys WRT54GL 1.0 CL7Axxx
  Linksys WRT54GL 1.1 CL7Bxxx
  
  Linksys WRT54GS 1.0 CGN0xxx or CGN1xxx
  Linksys WRT54GS 1.1 CGN2xxx
  Linksys WRT54GS 2.0 CGN3xxx
  Linksys WRT54GS 2.1 CGN4xxx
  Linksys WRT54GS 3.0 CGN5xxx
  Linksys WRT54GS 4.0 CGN6xxx
  
  Allnet ALL0277
  Buffalo WHR-G54S
  Buffalo WHR-HP-G54S
  Buffalo WBR-G54
  Buffalo WLA-G54
  Buffalo WBR2-G54
  Buffalo WBR2-G54S
  Buffalo WZR-RS-G54
  Belkin F5D7130/7330 (2mb flash)
  Belkin F5D7230-4 v1444 (2mb flash)
  Belkin F5D7230-4 v1000
  ASUS WL500G-Deluxe
  Motorola WR850G/GP --> see flashing notes below
  Siemens Gigaset SE505 --> see flashing notes below
  Ravo W54-RT --> see flashing notes for SE505 v1 (identical to SE505 v1)
  Askey RT210W --> see flashing notes for SE505 v1 (identical to SE505 v1)
  
  
  3.) Linksys WRT54G/GS (any version) flashing notes:
  ---------------------------------------------------
  -For upgrading from the original Linksys firmware, please use the generic mini version (dd-wrt.vXX_mini_generic.bin) and flash it from the web GUI interface. After this first flashing you can change to any other distribution, if you want.
  -For flashing via the web GUI interface, always use the included 'generic' binaries. The other Linksys router specific binaries are only meant for tftp upgrades.
  
  
  4.) Motorola WR850G flashing notes:
  -----------------------------------
  -Just use the dd-wrt.v23_mini_moto.bin for initial flashing of the motorola device using the boot wait state.
  -WARNING: Never, and I say never try to clear the nvram by the mtd utility. (mtd erase nvram). This will also delete your hardware MAC adresses which aren't stored in the CFE like in other routers.
  -DD-WRT itself prevents this if a Motorola router is detected, but the commandline mtd utility can still brick your router in this case
  
  5.) Siemens Gigaset SE505 Flashing notes:
  ---------------------------------
  -For flashing the Siemens Gigaset SE505, you have to use the dd-wrt.v23_mini_generic.bin with boot tftp on 192.168.2.1
  -Since the Siemens default settings do not fit to the Linksys/dd-wrt settings you must additionally check your configuration details after flashing.
  
  itt benne van a lényeg

  Simi

Új hozzászólás Aktív témák