Új hozzászólás Aktív témák

• #10631 klambi addikt

  Új Válasz 2010-12-26 20:27:04 #10631

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  klambi

  addikt

  egyenlőre most az a gondom, hogy csiszolgattam de 1x csak eltünt és nem jön elő, mi lehet a baja, nagyon berágott rám...
  Use Xft?
  use_Xft yes
  font snap-7
  #xftfont snap.se:size=8.0
  #xftfont Freemono:size=7:bold
  #xftfont cure.se:size=8
  xftfont Freesans:pixelsize=10
  xftalpha 21
  text_buffer_size 2048
  # Update interval in seconds
  update_interval 1

  # This is the number of times Conky will update before quitting.
  # Set to zero to run forever.
  total_run_times 0

  # Create own window instead of using desktop (required in nautilus)
  own_window yes
  own_window_transparent yes
  own_window_type override
  #own_window_hints undecorated,below,sticky,skip_taskbar,skip_pager

  # Use double buffering (reduces flicker, may not work for everyone)
  double_buffer yes

  # Minimum size of text area
  minimum_size 190
  maximum_width 250

  # Draw shades?
  draw_shades no

  # Draw outlines?
  draw_outline no

  # Draw borders around text
  draw_borders no

  # Stippled borders?
  stippled_borders 0

  # border margins
  border_margin 10

  # border width
  border_width 5

  # Default colors and also border colors
  default_color e0e0e0
  #default_shade_color white
  #default_outline_color 000000
  #own_window_colour 000000

  # Text alignment, other possible values are commented
  #alignment top_left
  alignment top_right
  #alignment bottom_left
  #alignment bottom_right

  # Gap between borders of screen and text
  # same thing as passing -x at command line
  gap_x 30
  gap_y 55

  # Subtract file system buffers from used memory?
  no_buffers yes

  # set to yes if you want all text to be in uppercase
  uppercase no

  # number of cpu samples to average
  # set to 1 to disable averaging
  cpu_avg_samples 2

  # number of net samples to average
  # set to 1 to disable averaging
  net_avg_samples 2

  # Force UTF8? note that UTF8 support required Xft
  override_utf8_locale yes

  # Add spaces to keep things from moving about? This only affects certain objects.
  use_spacer none

  TEXT

  DATE ${hr 1}
  ${alignc 18}${font Freesans:pixelsize=23:bold}${time %H:%M}${font}

  ${alignc 13}${font Freesans:pixelsize=15}${time %a %d %b %Y}${font}

  SYS ${hr 1}

  ${alignc}Ubuntu Linux 10.10 Klambi

  Uptime ${alignr}${uptime}
  Kernel ${alignr}${kernel}
  CPU1 ${freq_g 1} GHz${alignr}${cpu cpu0}% ${cpubar cpu1 4,60}
  CPU2 ${freq_g 2} GHz ${alignr}${cpu cpu1}% ${cpubar cpu2 4,60}
  CPU FAN${alignr}${hwmon fan 2} PRM
  RAM ${alignr}$memperc% ${membar 4,60}
  SWAP ${alignr}${swapperc}% ${swapbar 4,60}
  ${if_existing /proc/acpi/battery/BAT1/state capacity}Battery ${alignr}${battery_percent BAT1}% ${battery_bar 4,60 BAT1}${else}${voffset -12}${endif}
  HDD ${hr 1}
  Írás $alignr $diskio_write
  ${diskiograph_write 20,200}
  Olvasás $alignr $diskio_read
  ${diskiograph_read 20,200}

  Filesystem ${alignr}${fs_used_perc /}% ${fs_bar 4,60 /}
  Adat ${alignr}${fs_used_perc /media/Adat}% ${fs_bar 4,60 /media/Adat}
  Windows${alignr}${fs_used_perc /media/Windows}% ${fs_bar 4,60 /media/Windows}

  TEMP ${hr 1}

  CPU ${alignr}${acpitemp}°C
  HDD ${alignr}${color lightgrey}${execi 5 hddtemp /dev/sda | cut -c 30-40}°C
  GPU ${alignr}${hwmon 0 temp 1}°C
  CPU Temperature: ${hwmon temp 2}°C
  CPU fan speed: ${hwmon fan 2} RPM

  NET ${hr 1}
  ${if_existing /proc/net/route wlan0}
  Signal ${alignr}${wireless_link_qual wlan0}%
  Link Quality:${alignr}${wireless_link_qual_perc wlan0}%
  ESSID:${alignr} ${wireless_essid wlan0}
  Up: ${upspeed wlan0} kb/s ${alignr 90}${upspeedgraph wlan0 15}
  Down ${downspeed wlan0} kb/s ${alignr 90}${downspeedgraph wlan0 15}
  Local Ip ${alignr}${addr wlan0}
  Public Ip ${alignr}${execi 1 ~/.scripts/ip.sh}
  ${else}${if_existing /proc/net/route eth0}
  Up ${upspeed eth0} kb/s ${alignr}${upspeedgraph eth0 4,60 000000 000000}
  Down ${downspeed eth0} kb/s ${alignr}${downspeedgraph eth0 4,60 000000 000000}
  Local Ip ${alignr}${addr eth0}
  Public Ip ${alignr}${execi 1 ~/.scripts/ip.sh}
  ${endif}${else}
  Network Unavailable
  ${endif}
  így nézett ki, nem 100%os de megjelent,most meg már nemakar...

  orvosság valaki?

  "Mond szépen angolul: Gyors róka!"

Új hozzászólás Aktív témák