2. Fórumok
  3. Okostelefonok
  4. Redmi Note 7 - nota bene

Új hozzászólás Aktív témák

  • #3352 Gloob addikt G48 #3333
    Új Válasz #3352
    Új hozzászólás
    Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra
    Privát üzenet küldése

    Gloob

    addikt

    válasz G48 #3333 üzenetére

    Ez egy gps.conf file, amit a magisk modul hozott létre. Ha jól rémlik nekem, akkor az ntp szerverek azok európai szerverek. Bár már nagyon régen foglalkoztam a kérdéssel, még anno a 3 betűs navigáció kapcsán.

    #Uncommenting these urls would only enable
    #the power up auto injection and force injection(test case).
    XTRA_SERVER_1=https://xtrapath1.izatcloud.net/xtra3grc.bin
    XTRA_SERVER_2=https://xtrapath2.izatcloud.net/xtra3grc.bin
    XTRA_SERVER_3=https://xtrapath3.izatcloud.net/xtra3grc.bin
    XTRA_SERVER_4=https://ssl.gpsonextra.net/xtra3grc.bin
    XTRA_SERVER_5=https://ssl.izatcloud.net/xtra3grc.bin

    #Test for XTRA
    XTRA_TEST_ENABLED = 1

    #Version check for XTRA
    #DISABLE = 0
    #AUTO = 1
    #XTRA2 = 2
    #XTRA3 = 3
    XTRA_VERSION_CHECK=3

    # Error Estimate
    # _SET = 1
    # _CLEAR = 0
    ERR_ESTIMATE=0

    #NTP server
    NTP_SERVER=pool.ntp.org
    NTP_SERVER_1=0.pool.ntp.org
    NTP_SERVER_2=1.pool.ntp.org
    NTP_SERVER_3=2.pool.ntp.org
    NTP_SERVER_4=3.pool.ntp.org

    #XTRA CA path
    XTRA_CA_PATH=/system/etc/security/cacerts

    # DEBUG LEVELS: 0 - none, 1 - Error, 2 - Warning, 3 - Info
    # 4 - Debug, 5 - Verbose
    # If DEBUG_LEVEL is commented, Android's logging levels will be used
    DEBUG_LEVEL = 0

    # Intermediate position report, 1=enable, 0=disable
    INTERMEDIATE_POS=0

    # Accuracy threshold for intermediate positions
    # less accurate positions are ignored, 0 for passing all positions
    ACCURACY_THRES=0

    # Below bit mask configures how GPS functionalities
    # should be locked when user turns off GPS on Settings
    # Set bit 0x1 if MO GPS functionalities are to be locked
    # Set bit 0x2 if NI GPS functionalities are to be locked
    # default - non is locked for backward compatibility
    #GPS_LOCK = 0

    # supl version 3.0
    SUPL_VER=0x30000

    # Report supl ref location as position, 1=enabled, 0=disabled
    REPORT_POSITION_USE_SUPL_REFLOC=1

    # Emergency SUPL, 1=enable, 0=disable
    SUPL_ES=1

    #Choose PDN for Emergency SUPL
    #1 - Use emergency PDN
    #0 - Use regular SUPL PDN for Emergency SUPL
    USE_EMERGENCY_PDN_FOR_EMERGENCY_SUPL=1

    #SUPL_MODE is a bit mask set in config.xml per carrier by default.
    #If it is uncommented here, this value will overwrite the value from
    #config.xml.
    #MSA=0X2
    #MSB=0X1
    SUPL_MODE=0X2

    # GPS Capabilities bit mask
    # SCHEDULING = 0x01
    # MSB = 0x02
    # MSA = 0x04
    # ON_DEMAND_TIME = 0x10
    # GEOFENCE = 0x20
    # default = ON_DEMAND_TIME | MSA | MSB | SCHEDULING | GEOFENCE
    CAPABILITIES=0x37

    # Wiper (wifi positioning), 1=enabled, 0=disabled
    ENABLE_WIPER=1

    ################################
    ##### AGPS server settings #####
    ################################

    # FOR SUPL SUPPORT, set the following
    SUPL_HOST=supl.google.com
    SUPL_PORT=7275

    # FOR C2K PDE SUPPORT, set the following
    # C2K_HOST=c2k.pde.com or IP
    # C2K_PORT=1234

    # Bitmask of slots that are available
    # for write/install to, where 1s indicate writable,
    # and the default value is 0 where no slots
    # are writable. For example, AGPS_CERT_WRITABLE_MASK
    # of b1000001010 makes 3 slots available
    # and the remaining 7 slots unwritable.
    #AGPS_CERT_WRITABLE_MASK=0

    ####################################
    # LTE Positioning Profile Settings
    ####################################
    # 0: Enable RRLP on LTE(Default)
    # 1: Enable LPP_User_Plane on LTE
    # 2: Enable LPP_Control_Plane
    # 3: Enable both LPP_User_Plane and LPP_Control_Plane
    LPP_PROFILE = 3

    ################################
    # EXTRA SETTINGS
    ################################
    # NMEA provider (1=Modem Processor, 0=Application Processor)
    NMEA_PROVIDER=1
    # Mark if it is a SGLTE target (1=SGLTE, 0=nonSGLTE)
    SGLTE_TARGET=1

    ##################################################
    # Select Positioning Protocol on A-GLONASS system
    ##################################################
    # 0x1: RRC CPlane
    # 0x2: RRLP UPlane
    # 0x4: LLP Uplane
    A_GLONASS_POS_PROTOCOL_SELECT = 0x4

    ##################################################
    # Select technology for LPPe Control Plane
    ##################################################
    # 0x1: DBH for LPPe CP
    # 0x2: WLAN AP Measurements for LPPe CP
    # 0x4: SRN AP measurement for CP
    # 0x8: Sensor Barometer Measurement LPPe CP
    LPPE_CP_TECHNOLOGY = 0x2

    ##################################################
    # Select technology for LPPe User Plane0
    ##################################################
    # 0x1: DBH for LPPe UP
    # 0x2: WLAN AP Measurements for LPPe UP
    # 0x4: SRN AP measurement for UP
    # 0x8: Sensor Barometer Measurement LPPe UP
    LPPE_UP_TECHNOLOGY = 0x2

    ##################################################
    # AGPS_CONFIG_INJECT
    ##################################################
    # enable/disable injection of AGPS configurations:
    # SUPL_VER
    # SUPL_HOST
    # SUPL_PORT
    # C2K_HOST
    # C2K_PORT
    # LPP_PROFILE
    # A_GLONASS_POS_PROTOCOL_SELECT
    # 0: disable
    # 1: enable
    AGPS_CONFIG_INJECT = 1

    ##################################################
    # GNSS settings for automotive use cases
    # Configurations in following section are
    # specific to automotive use cases, others
    # please do not change, keep the default values
    ##################################################

    ##################################################
    # AP Coarse Timestamp Uncertainty
    ##################################################
    # default : 10
    # AP time stamp uncertainty, until GNSS receiver
    # is able to acquire better timing information
    AP_TIMESTAMP_UNCERTAINTY = 10

    ##################################################
    # QDR engine availability status
    ##################################################
    # 0 : NO QDR (default)
    # 1 : QDR enabled
    # This settings enables QDR Configuration for
    # automotive use case, if enabled then
    # DR_AP_Service needs to be enabled in izat.con
    #EXTERNAL_DR_ENABLED = 0

    #####################################
    # DR_SYNC Pulse Availability
    #####################################
    # 0 : DR_SYNC pulse not available (default)
    # 1 : DR_SYNC pulse available
    # This configuration enables the driver to make use
    # of PPS events generated by DR_SYNC pulse
    # Standard Linux PPS driver needs to be enabled
    DR_SYNC_ENABLED = 0

    #####################################
    # PPS Device name
    #####################################
    PPS_DEVICENAME = /dev/pps0

    #####################################
    # AP Clock Accuracy
    #####################################
    # Quality of APPS processor clock (in PPM).
    # Value specified is used for calculation of
    # APPS time stamp uncertainty
    AP_CLOCK_PPM = 100

    #####################################
    # MAX ms difference to detect missing pulse
    #####################################
    # Specifies time threshold in ms to validate any missing PPS pulses
    MISSING_PULSE_TIME_DELTA = 900

    #####################################
    # Propagation time uncertainty
    #####################################
    # This settings enables time uncertainty propagation
    # logic incase of missing PPS pulse
    PROPAGATION_TIME_UNCERTAINTY = 1

    Samsung Galaxy A52S

Új hozzászólás Aktív témák