Új hozzászólás Aktív témák

  • Mr. Y

    senior tag

    LOGOUT blog

    válasz cappa72 #3040 üzenetére

    Oké, akkor most sokminden van.
    Egyrészt ugyan azt a kk-t megtaláltam a telepített NOVA 5.0-jában a build.prop fájlok között, de ez most csak mellékes, szerintem nem azt jelenti.

    A modemmanager kikapcsolva. A csatlakozott eszközök... Lehet, én vagyok vak, de nem tudok ezen kiigazodni;

    [ 0.754467] platform eisa.0: Cannot allocate resource for EISA slot 5
    [ 0.754469] platform eisa.0: Cannot allocate resource for EISA slot 6
    [ 0.754471] platform eisa.0: Cannot allocate resource for EISA slot 7
    [ 0.754473] platform eisa.0: Cannot allocate resource for EISA slot 8
    [ 0.754475] platform eisa.0: EISA: Detected 0 cards
    [ 0.754482] cpufreq-nforce2: No nForce2 chipset.
    [ 0.754485] ledtrig-cpu: registered to indicate activity on CPUs
    [ 0.754622] TCP: cubic registered
    [ 0.754723] NET: Registered protocol family 10
    [ 0.754926] NET: Registered protocol family 17
    [ 0.754936] Key type dns_resolver registered
    [ 0.755084] Using IPI No-Shortcut mode
    [ 0.755160] Loading compiled-in X.509 certificates
    [ 0.758607] Loaded X.509 cert 'Magrathea: Glacier signing key: 7acf8ed948d77b6a80f24f59d5d8ed0387aab426'
    [ 0.758619] registered taskstats version 1
    [ 0.764889] Key type trusted registered
    [ 0.779731] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input2
    [ 0.780893] Key type encrypted registered
    [ 0.796872] AppArmor: AppArmor sha1 policy hashing enabled
    [ 0.796876] IMA: No TPM chip found, activating TPM-bypass!
    [ 0.797092] regulator-dummy: disabling
    [ 0.797128] Magic number: 4:483:442
    [ 0.797207] rtc_cmos 00:03: setting system clock to 2016-02-03 18:26:22 UTC (1454523982)
    [ 0.797450] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found
    [ 0.797452] EDD information not available.
    [ 0.797482] PM: Hibernation image not present or could not be loaded.
    [ 0.907619] ata1.00: HPA detected: current 976771055, native 976773168
    [ 0.907623] ata1.00: ATA-8: WDC WD5000AAKS-00V1A0, 05.01D05, max UDMA/133
    [ 0.907626] ata1.00: 976771055 sectors, multi 16: LBA48 NCQ (depth 0/32)
    [ 0.912251] ata2.01: ATAPI: TSSTcorp CDDVDW SH-S223B, SB01, max UDMA/100
    [ 0.920619] ata1.00: configured for UDMA/133
    [ 0.928116] ata2.01: configured for UDMA/100
    [ 1.061589] isapnp: No Plug & Play device found
    [ 1.061701] scsi 0:0:0:0: Direct-Access ATA WDC WD5000AAKS-0 05.0 PQ: 0 ANSI: 5
    [ 1.061807] sd 0:0:0:0: [sda] 976771055 512-byte logical blocks: (500 GB/465 GiB)
    [ 1.061834] sd 0:0:0:0: Attached scsi generic sg0 type 0
    [ 1.061845] sd 0:0:0:0: [sda] Write Protect is off
    [ 1.061848] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00
    [ 1.061864] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
    [ 1.062537] scsi 1:0:1:0: CD-ROM TSSTcorp CDDVDW SH-S223B SB01 PQ: 0 ANSI: 5
    [ 1.064847] sr0: scsi3-mmc drive: 48x/48x writer dvd-ram cd/rw xa/form2 cdda tray
    [ 1.064851] cdrom: Uniform CD-ROM driver Revision: 3.20
    [ 1.065013] sr 1:0:1:0: Attached scsi CD-ROM sr0
    [ 1.065088] sr 1:0:1:0: Attached scsi generic sg1 type 5
    [ 1.167957] sda: sda1 sda2 sda3 < sda5 sda6 sda7 sda8 sda9 sda10 >
    [ 1.168431] sd 0:0:0:0: [sda] Attached SCSI disk
    [ 1.168745] Freeing unused kernel memory: 872K (c19b9000 - c1a93000)
    [ 1.168780] Write protecting the kernel text: 6544k
    [ 1.168857] Write protecting the kernel read-only data: 2768k
    [ 1.168859] NX-protecting the kernel data: 5744k
    [ 1.182159] systemd-udevd[101]: starting version 204
    [ 1.214628] [drm] Initialized drm 1.1.0 20060810
    [ 1.223112] r8169 Gigabit Ethernet driver 2.3LK-NAPI loaded
    [ 1.223124] r8169 0000:03:00.0: can't disable ASPM; OS doesn't have ASPM control
    [ 1.223339] r8169 0000:03:00.0: irq 43 for MSI/MSI-X
    [ 1.223509] r8169 0000:03:00.0 eth0: RTL8102e at 0xf8418000, 00:24:1d:98:d6:3d, XID 14a00000 IRQ 43
    [ 1.279583] usb 4-1: new low-speed USB device number 2 using uhci_hcd
    [ 1.289441] [drm] radeon kernel modesetting enabled.
    [ 1.289729] [drm] initializing kernel modesetting (RV730 0x1002:0x9490 0x1002:0x2542).
    [ 1.289745] [drm] register mmio base: 0xE1000000
    [ 1.289747] [drm] register mmio size: 65536
    [ 1.289887] ATOM BIOS: RV730
    [ 1.289926] radeon 0000:01:00.0: VRAM: 512M 0x0000000000000000 - 0x000000001FFFFFFF (512M used)
    [ 1.289929] radeon 0000:01:00.0: GTT: 1024M 0x0000000020000000 - 0x000000005FFFFFFF
    [ 1.289930] [drm] Detected VRAM RAM=512M, BAR=256M
    [ 1.289932] [drm] RAM width 128bits DDR
    [ 1.289987] [TTM] Zone kernel: Available graphics memory: 440214 kiB
    [ 1.289989] [TTM] Zone highmem: Available graphics memory: 1031514 kiB
    [ 1.289990] [TTM] Initializing pool allocator
    [ 1.289995] [TTM] Initializing DMA pool allocator
    [ 1.290013] [drm] radeon: 512M of VRAM memory ready
    [ 1.290015] [drm] radeon: 1024M of GTT memory ready.
    [ 1.290026] [drm] Loading RV730 Microcode
    [ 1.290326] [drm] GART: num cpu pages 262144, num gpu pages 262144
    [ 1.315640] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
    [ 1.315688] radeon 0000:01:00.0: WB enabled
    [ 1.315692] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffc36c00
    [ 1.315694] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffc36c0c
    [ 1.316597] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xf881c598
    [ 1.318820] [drm] Supports vblank timestamp caching Rev 2 (21.10.2013).
    [ 1.318824] [drm] Driver supports precise vblank timestamp query.
    [ 1.318849] radeon 0000:01:00.0: irq 44 for MSI/MSI-X
    [ 1.318863] radeon 0000:01:00.0: radeon: using MSI.
    [ 1.318891] [drm] radeon: irq initialized.
    [ 1.365230] [drm] ring test on 0 succeeded in 1 usecs
    [ 1.365288] [drm] ring test on 3 succeeded in 1 usecs
    [ 1.457213] usb 4-1: New USB device found, idVendor=046e, idProduct=557e
    [ 1.457218] usb 4-1: New USB device strings: Mfr=1, Product=2, SerialNumber=0
    [ 1.457220] usb 4-1: Product: USB Multimedia Cordless Mouse
    [ 1.457222] usb 4-1: Manufacturer: BTC
    [ 1.468259] hidraw: raw HID events driver (C) Jiri Kosina
    [ 1.493893] usbcore: registered new interface driver usbhid
    [ 1.493895] usbhid: USB HID core driver
    [ 1.498745] input: BTC USB Multimedia Cordless Mouse as /devices/pci0000:00/0000:00:1d.2/usb4/4-1/4-1:1.0/input/input3
    [ 1.498923] hid-generic 0003:046E:557E.0001: input,hidraw0: USB HID v1.11 Mouse [BTC USB Multimedia Cordless Mouse] on usb-0000:00:1d.2-1/input0
    [ 1.559832] [drm] ring test on 5 succeeded in 1 usecs
    [ 1.559839] [drm] UVD initialized successfully.
    [ 1.559991] [drm] Enabling audio 0 support
    [ 1.560021] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 1.560038] [drm] ib test on ring 3 succeeded in 0 usecs
    [ 1.708889] tsc: Refined TSC clocksource calibration: 2499.939 MHz
    [ 1.709340] [drm] ib test on ring 5 succeeded
    [ 1.709736] [drm] Radeon Display Connectors
    [ 1.709738] [drm] Connector 0:
    [ 1.709740] [drm] HDMI-A-1
    [ 1.709741] [drm] HPD3
    [ 1.709743] [drm] DDC: 0x7f10 0x7f10 0x7f14 0x7f14 0x7f18 0x7f18 0x7f1c 0x7f1c
    [ 1.709744] [drm] Encoders:
    [ 1.709746] [drm] DFP2: INTERNAL_UNIPHY1
    [ 1.709747] [drm] Connector 1:
    [ 1.709748] [drm] DVI-I-1
    [ 1.709749] [drm] HPD1
    [ 1.709751] [drm] DDC: 0x7e60 0x7e60 0x7e64 0x7e64 0x7e68 0x7e68 0x7e6c 0x7e6c
    [ 1.709752] [drm] Encoders:
    [ 1.709754] [drm] CRT1: INTERNAL_KLDSCP_DAC1
    [ 1.709755] [drm] DFP3: INTERNAL_UNIPHY2
    [ 1.709756] [drm] Connector 2:
    [ 1.709757] [drm] DVI-I-2
    [ 1.709758] [drm] HPD2
    [ 1.709760] [drm] DDC: 0x7e20 0x7e20 0x7e24 0x7e24 0x7e28 0x7e28 0x7e2c 0x7e2c
    [ 1.709761] [drm] Encoders:
    [ 1.709763] [drm] DFP1: INTERNAL_UNIPHY
    [ 1.709764] [drm] CRT2: INTERNAL_KLDSCP_DAC2
    [ 1.709790] [drm] Internal thermal controller with fan control
    [ 1.714701] [drm] radeon: dpm initialized
    [ 1.760845] [drm] fb mappable at 0xD045E000
    [ 1.760847] [drm] vram apper at 0xD0000000
    [ 1.760848] [drm] size 5242880
    [ 1.760850] [drm] fb depth is 24
    [ 1.760851] [drm] pitch is 5120
    [ 1.760910] fbcon: radeondrmfb (fb0) is primary device
    [ 1.781344] Console: switching to colour frame buffer device 160x64
    [ 1.786464] radeon 0000:01:00.0: fb0: radeondrmfb frame buffer device
    [ 1.786466] radeon 0000:01:00.0: registered panic notifier
    [ 1.786470] [drm] Initialized radeon 2.36.0 20080528 for 0000:01:00.0 on minor 0
    [ 2.564001] EXT4-fs (sda8): mounted filesystem with ordered data mode. Opts: (null)
    [ 2.649815] random: nonblocking pool is initialized
    [ 2.708739] Switched to clocksource tsc
    [ 9.987121] Adding 2084860k swap on /dev/sda9. Priority:-1 extents:1 across:2084860k FS
    [ 10.028772] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 10.154600] systemd-udevd[344]: starting version 204
    [ 10.190992] EXT4-fs (sda8): re-mounted. Opts: errors=remount-ro
    [ 10.229737] lp: driver loaded but no devices found
    [ 10.257182] ppdev: user-space parallel port driver
    [ 10.264175] parport_pc 00:07: reported by Plug and Play ACPI
    [ 10.264223] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
    [ 10.360663] lp0: using parport0 (interrupt-driven).
    [ 10.376326] intel_rng: FWH not detected
    [ 10.393494] ACPI Warning: 0x00000428-0x0000042f SystemIO conflicts with Region \GP2C 1 (20131115/utaddress-251)
    [ 10.393502] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
    [ 10.393551] lpc_ich: Resource conflict(s) found affecting gpio_ich
    [ 10.397792] leds_ss4200: no LED devices found
    [ 10.528681] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 10.553445] SKU: Nid=0x0 sku_cfg=0x0000c603
    [ 10.553448] SKU: port_connectivity=0x0
    [ 10.553449] SKU: enable_pcbeep=0x1
    [ 10.553451] SKU: check_sum=0x00000000
    [ 10.553452] SKU: customization=0x00000000
    [ 10.553453] SKU: external_amp=0x0
    [ 10.553454] SKU: platform_type=0x0
    [ 10.553455] SKU: swap=0x1
    [ 10.553456] SKU: override=0x1
    [ 10.553783] autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:line
    [ 10.553785] speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
    [ 10.553786] hp_outs=1 (0x1b/0x0/0x0/0x0/0x0)
    [ 10.553787] mono: mono_out=0x0
    [ 10.553789] dig-out=0x1e/0x0
    [ 10.553790] inputs:
    [ 10.553792] Rear Mic=0x18
    [ 10.553793] Front Mic=0x19
    [ 10.553795] Line=0x1a
    [ 10.553796] CD=0x1c
    [ 10.553798] realtek: Enabling init ASM_ID=0xc603 CODEC_ID=10ec0883
    [ 10.567560] input: HDA Intel Front Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input8
    [ 10.567683] input: HDA Intel Line Out as /devices/pci0000:00/0000:00:1b.0/sound/card0/input7
    [ 10.567788] input: HDA Intel Line as /devices/pci0000:00/0000:00:1b.0/sound/card0/input6
    [ 10.567893] input: HDA Intel Front Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input5
    [ 10.567997] input: HDA Intel Rear Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input4
    [ 10.568524] hda-intel 0000:01:00.1: Handle VGA-switcheroo audio client
    [ 10.568527] hda-intel 0000:01:00.1: Using LPIB position fix
    [ 10.568572] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
    [ 10.571081] hda-intel 0000:01:00.1: Enable sync_write for stable communication
    [ 10.628690] HDMI ATI/AMD: no speaker allocation for ELD
    [ 10.628922] input: HDA ATI HDMI HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:01.0/0000:01:00.1/sound/card1/input9
    [ 10.630553] device-mapper: multipath: version 1.6.0 loaded
    [ 10.922505] gpio_ich: GPIO from 206 to 255 on gpio_ich
    [ 10.996405] init: failsafe main process (548) killed by TERM signal
    [ 11.099588] Bluetooth: Core ver 2.17
    [ 11.099631] NET: Registered protocol family 31
    [ 11.099633] Bluetooth: HCI device and connection manager initialized
    [ 11.099666] Bluetooth: HCI socket layer initialized
    [ 11.099669] Bluetooth: L2CAP socket layer initialized
    [ 11.099675] Bluetooth: SCO socket layer initialized
    [ 11.107511] Bluetooth: RFCOMM TTY layer initialized
    [ 11.107522] Bluetooth: RFCOMM socket layer initialized
    [ 11.107530] Bluetooth: RFCOMM ver 1.11
    [ 11.246340] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
    [ 11.246344] Bluetooth: BNEP filters: protocol multicast
    [ 11.246354] Bluetooth: BNEP socket layer initialized
    [ 11.436541] init: cups main process (642) killed by HUP signal
    [ 11.436554] init: cups main process ended, respawning
    [ 12.981190] r8169 0000:03:00.0 eth0: link down
    [ 12.981204] r8169 0000:03:00.0 eth0: link down
    [ 12.981275] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 12.981742] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 13.123870] init: samba-ad-dc main process (720) terminated with status 1
    [ 14.630692] r8169 0000:03:00.0 eth0: link up
    [ 14.630703] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 15.356213] init: plymouth-upstart-bridge main process ended, respawning
    [ 15.362478] init: plymouth-upstart-bridge main process (1325) terminated with status 1
    [ 15.362492] init: plymouth-upstart-bridge main process ended, respawning
    [ 1754.011715] perf samples too long (2501 > 2500), lowering kernel.perf_event_max_sample_rate to 50000
    [ 3201.219548] PM: Syncing filesystems ... done.
    [ 3201.327056] PM: Preparing system for mem sleep
    [ 3201.516675] Freezing user space processes ... (elapsed 0.001 seconds) done.
    [ 3201.518153] Freezing remaining freezable tasks ... (elapsed 0.001 seconds) done.
    [ 3201.519312] PM: Entering mem sleep
    [ 3201.519330] Suspending console(s) (use no_console_suspend to debug)
    [ 3201.519655] sd 0:0:0:0: [sda] Synchronizing SCSI cache
    [ 3201.527470] sd 0:0:0:0: [sda] Stopping disk
    [ 3201.530800] parport_pc 00:07: disabled
    [ 3201.530877] serial 00:06: disabled
    [ 3201.530897] serial 00:06: System wakeup disabled by ACPI
    [ 3202.238517] [drm:rv730_stop_dpm] *ERROR* Could not force DPM to low
    [ 3202.238524] [drm] Disabling audio 0 support
    [ 3202.424086] PM: suspend of devices complete after 904.512 msecs
    [ 3202.424376] PM: late suspend of devices complete after 0.287 msecs
    [ 3202.424524] pcieport 0000:00:1c.1: System wakeup enabled by ACPI
    [ 3202.440151] ehci-pci 0000:00:1d.7: System wakeup enabled by ACPI
    [ 3202.456049] uhci_hcd 0000:00:1d.3: System wakeup enabled by ACPI
    [ 3202.456080] uhci_hcd 0000:00:1d.2: System wakeup enabled by ACPI
    [ 3202.456111] uhci_hcd 0000:00:1d.1: System wakeup enabled by ACPI
    [ 3202.456141] uhci_hcd 0000:00:1d.0: System wakeup enabled by ACPI
    [ 3202.456253] PM: noirq suspend of devices complete after 31.875 msecs
    [ 3202.456637] ACPI: Preparing to enter system sleep state S3
    [ 3202.457913] PM: Saving platform NVS memory
    [ 3202.457973] Disabling non-boot CPUs ...
    [ 3202.560014] smpboot: CPU 1 is now offline
    [ 3202.560249] ACPI: Low-level resume complete
    [ 3202.560249] PM: Restoring platform NVS memory
    [ 3202.560249] Enabling non-boot CPUs ...
    [ 3202.560249] x86: Booting SMP configuration:
    [ 3202.560249] smpboot: Booting Node 0 Processor 1 APIC 0x1
    [ 3202.459280] Initializing CPU#1
    [ 3202.573859] CPU1 is up
    [ 3202.575082] ACPI: Waking up from system sleep state S3
    [ 3202.588225] uhci_hcd 0000:00:1d.0: System wakeup disabled by ACPI
    [ 3202.588246] uhci_hcd 0000:00:1d.1: System wakeup disabled by ACPI
    [ 3202.588267] uhci_hcd 0000:00:1d.2: System wakeup disabled by ACPI
    [ 3202.588287] uhci_hcd 0000:00:1d.3: System wakeup disabled by ACPI
    [ 3202.604057] ehci-pci 0000:00:1d.7: System wakeup disabled by ACPI
    [ 3202.668250] PM: noirq resume of devices complete after 92.396 msecs
    [ 3202.668358] PM: early resume of devices complete after 0.081 msecs
    [ 3202.668469] snd_hda_intel 0000:00:1b.0: irq 45 for MSI/MSI-X
    [ 3202.672154] usb usb2: root hub lost power or was reset
    [ 3202.672176] pcieport 0000:00:1c.1: System wakeup disabled by ACPI
    [ 3202.673926] usb usb3: root hub lost power or was reset
    [ 3202.674021] usb usb4: root hub lost power or was reset
    [ 3202.674112] usb usb5: root hub lost power or was reset
    [ 3202.674177] [drm] PCIE GART of 1024M enabled (table at 0x000000000025D000).
    [ 3202.674205] radeon 0000:01:00.0: WB enabled
    [ 3202.674207] radeon 0000:01:00.0: fence driver on ring 0 use gpu addr 0x0000000020000c00 and cpu addr 0xffc36c00
    [ 3202.674209] radeon 0000:01:00.0: fence driver on ring 3 use gpu addr 0x0000000020000c0c and cpu addr 0xffc36c0c
    [ 3202.674358] snd_hda_intel 0000:01:00.1: irq 46 for MSI/MSI-X
    [ 3202.675199] radeon 0000:01:00.0: fence driver on ring 5 use gpu addr 0x000000000005c598 and cpu addr 0xf881c598
    [ 3202.675391] serial 00:06: activated
    [ 3202.675744] parport_pc 00:07: activated
    [ 3202.721036] [drm] ring test on 0 succeeded in 1 usecs
    [ 3202.721092] [drm] ring test on 3 succeeded in 1 usecs
    [ 3202.864119] ata2.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered out
    [ 3202.864120] ata2.01: ACPI cmd ef/03:45:00:00:00:b0 (SET FEATURES) filtered out
    [ 3202.864122] ata2.01: ACPI cmd ef/03:0c:00:00:00:b0 (SET FEATURES) filtered out
    [ 3202.896123] ata2.01: configured for UDMA/100
    [ 3202.915578] [drm] ring test on 5 succeeded in 1 usecs
    [ 3202.915580] [drm] UVD initialized successfully.
    [ 3202.915582] [drm] Enabling audio 0 support
    [ 3202.915609] [drm] ib test on ring 0 succeeded in 0 usecs
    [ 3202.915611] HDMI ATI/AMD: no speaker allocation for ELD
    [ 3202.915625] [drm] ib test on ring 3 succeeded in 1 usecs
    [ 3203.074871] [drm] ib test on ring 5 succeeded
    [ 3203.152021] usb 4-1: reset low-speed USB device number 2 using uhci_hcd
    [ 3203.212017] HDMI ATI/AMD: no speaker allocation for ELD
    [ 3203.512027] HDMI ATI/AMD: no speaker allocation for ELD
    [ 3203.812027] HDMI ATI/AMD: no speaker allocation for ELD
    [ 3204.112025] HDMI ATI/AMD: no speaker allocation for ELD
    [ 3204.412028] HDMI ATI/AMD: no speaker allocation for ELD
    [ 3204.712022] HDMI ATI/AMD: no speaker allocation for ELD
    [ 3205.012032] HDMI ATI/AMD: no speaker allocation for ELD
    [ 3205.312029] HDMI ATI/AMD: no speaker allocation for ELD
    [ 3207.712017] ata1: link is slow to respond, please be patient (ready=0)
    [ 3209.388142] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
    [ 3209.388145] ata1.00: ACPI cmd ef/03:45:00:00:00:a0 (SET FEATURES) filtered out
    [ 3209.388149] ata1.00: ACPI cmd ef/03:0c:00:00:00:a0 (SET FEATURES) filtered out
    [ 3209.424285] ata1.00: configured for UDMA/133
    [ 3209.424360] sd 0:0:0:0: [sda] Starting disk
    [ 3209.431031] PM: resume of devices complete after 6762.671 msecs
    [ 3209.431343] PM: Finishing wakeup.
    [ 3209.432421] lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
    [ 3209.432427] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [ 3209.432431] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
    [ 3209.432448] pci 0000:00:00.0: no hotplug settings from platform
    [ 3209.432450] pci 0000:00:00.0: using default PCI settings
    [ 3209.432455] pcieport 0000:00:01.0: no hotplug settings from platform
    [ 3209.432463] radeon 0000:01:00.0: no hotplug settings from platform
    [ 3209.432469] snd_hda_intel 0000:01:00.1: no hotplug settings from platform
    [ 3209.432472] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    [ 3209.432476] pcieport 0000:00:1c.0: no hotplug settings from platform
    [ 3209.432479] pcieport 0000:00:1c.1: no hotplug settings from platform
    [ 3209.432487] r8169 0000:03:00.0: no hotplug settings from platform
    [ 3209.432490] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
    [ 3209.432492] uhci_hcd 0000:00:1d.0: using default PCI settings
    [ 3209.432499] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
    [ 3209.432501] uhci_hcd 0000:00:1d.1: using default PCI settings
    [ 3209.432508] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
    [ 3209.432509] uhci_hcd 0000:00:1d.2: using default PCI settings
    [ 3209.432517] uhci_hcd 0000:00:1d.3: no hotplug settings from platform
    [ 3209.432518] uhci_hcd 0000:00:1d.3: using default PCI settings
    [ 3209.432526] ehci-pci 0000:00:1d.7: no hotplug settings from platform
    [ 3209.432528] ehci-pci 0000:00:1d.7: using default PCI settings
    [ 3209.432536] pci 0000:00:1e.0: no hotplug settings from platform
    [ 3209.432537] pci 0000:00:1e.0: using default PCI settings
    [ 3209.432548] lpc_ich 0000:00:1f.0: no hotplug settings from platform
    [ 3209.432549] lpc_ich 0000:00:1f.0: using default PCI settings
    [ 3209.432558] ata_piix 0000:00:1f.2: no hotplug settings from platform
    [ 3209.432560] ata_piix 0000:00:1f.2: using default PCI settings
    [ 3209.432567] pci 0000:00:1f.3: no hotplug settings from platform
    [ 3209.432569] pci 0000:00:1f.3: using default PCI settings
    [ 3209.436402] lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
    [ 3209.436409] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [ 3209.436413] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
    [ 3209.436430] pci 0000:00:00.0: no hotplug settings from platform
    [ 3209.436432] pci 0000:00:00.0: using default PCI settings
    [ 3209.436438] pcieport 0000:00:01.0: no hotplug settings from platform
    [ 3209.436445] radeon 0000:01:00.0: no hotplug settings from platform
    [ 3209.436451] snd_hda_intel 0000:01:00.1: no hotplug settings from platform
    [ 3209.436454] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    [ 3209.436458] pcieport 0000:00:1c.0: no hotplug settings from platform
    [ 3209.436461] pcieport 0000:00:1c.1: no hotplug settings from platform
    [ 3209.436468] r8169 0000:03:00.0: no hotplug settings from platform
    [ 3209.436472] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
    [ 3209.436474] uhci_hcd 0000:00:1d.0: using default PCI settings
    [ 3209.436481] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
    [ 3209.436482] uhci_hcd 0000:00:1d.1: using default PCI settings
    [ 3209.436489] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
    [ 3209.436491] uhci_hcd 0000:00:1d.2: using default PCI settings
    [ 3209.436498] uhci_hcd 0000:00:1d.3: no hotplug settings from platform
    [ 3209.436500] uhci_hcd 0000:00:1d.3: using default PCI settings
    [ 3209.436507] ehci-pci 0000:00:1d.7: no hotplug settings from platform
    [ 3209.436509] ehci-pci 0000:00:1d.7: using default PCI settings
    [ 3209.436516] pci 0000:00:1e.0: no hotplug settings from platform
    [ 3209.436518] pci 0000:00:1e.0: using default PCI settings
    [ 3209.436528] lpc_ich 0000:00:1f.0: no hotplug settings from platform
    [ 3209.436530] lpc_ich 0000:00:1f.0: using default PCI settings
    [ 3209.436538] ata_piix 0000:00:1f.2: no hotplug settings from platform
    [ 3209.436540] ata_piix 0000:00:1f.2: using default PCI settings
    [ 3209.436547] pci 0000:00:1f.3: no hotplug settings from platform
    [ 3209.436549] pci 0000:00:1f.3: using default PCI settings
    [ 3209.436601] lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
    [ 3209.436604] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [ 3209.436607] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
    [ 3209.436620] pci 0000:00:00.0: no hotplug settings from platform
    [ 3209.436622] pci 0000:00:00.0: using default PCI settings
    [ 3209.436628] pcieport 0000:00:01.0: no hotplug settings from platform
    [ 3209.436634] radeon 0000:01:00.0: no hotplug settings from platform
    [ 3209.436640] snd_hda_intel 0000:01:00.1: no hotplug settings from platform
    [ 3209.436643] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    [ 3209.436646] pcieport 0000:00:1c.0: no hotplug settings from platform
    [ 3209.436649] pcieport 0000:00:1c.1: no hotplug settings from platform
    [ 3209.436656] r8169 0000:03:00.0: no hotplug settings from platform
    [ 3209.436660] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
    [ 3209.436661] uhci_hcd 0000:00:1d.0: using default PCI settings
    [ 3209.436669] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
    [ 3209.436671] uhci_hcd 0000:00:1d.1: using default PCI settings
    [ 3209.436678] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
    [ 3209.436680] uhci_hcd 0000:00:1d.2: using default PCI settings
    [ 3209.436688] uhci_hcd 0000:00:1d.3: no hotplug settings from platform
    [ 3209.436690] uhci_hcd 0000:00:1d.3: using default PCI settings
    [ 3209.436697] ehci-pci 0000:00:1d.7: no hotplug settings from platform
    [ 3209.436699] ehci-pci 0000:00:1d.7: using default PCI settings
    [ 3209.436706] pci 0000:00:1e.0: no hotplug settings from platform
    [ 3209.436708] pci 0000:00:1e.0: using default PCI settings
    [ 3209.436718] lpc_ich 0000:00:1f.0: no hotplug settings from platform
    [ 3209.436720] lpc_ich 0000:00:1f.0: using default PCI settings
    [ 3209.436728] ata_piix 0000:00:1f.2: no hotplug settings from platform
    [ 3209.436730] ata_piix 0000:00:1f.2: using default PCI settings
    [ 3209.436737] pci 0000:00:1f.3: no hotplug settings from platform
    [ 3209.436739] pci 0000:00:1f.3: using default PCI settings
    [ 3209.436802] lpc_ich 0000:00:1f.0: BAR 13: [io 0x0400-0x047f] has bogus alignment
    [ 3209.436805] pci 0000:00:1e.0: PCI bridge to [bus 04]
    [ 3209.436808] pci 0000:00:1e.0: bridge window [io 0xa000-0xafff]
    [ 3209.436821] pci 0000:00:00.0: no hotplug settings from platform
    [ 3209.436822] pci 0000:00:00.0: using default PCI settings
    [ 3209.436828] pcieport 0000:00:01.0: no hotplug settings from platform
    [ 3209.436834] radeon 0000:01:00.0: no hotplug settings from platform
    [ 3209.436840] snd_hda_intel 0000:01:00.1: no hotplug settings from platform
    [ 3209.436843] snd_hda_intel 0000:00:1b.0: no hotplug settings from platform
    [ 3209.436846] pcieport 0000:00:1c.0: no hotplug settings from platform
    [ 3209.436849] pcieport 0000:00:1c.1: no hotplug settings from platform
    [ 3209.436857] r8169 0000:03:00.0: no hotplug settings from platform
    [ 3209.436860] uhci_hcd 0000:00:1d.0: no hotplug settings from platform
    [ 3209.436861] uhci_hcd 0000:00:1d.0: using default PCI settings
    [ 3209.436868] uhci_hcd 0000:00:1d.1: no hotplug settings from platform
    [ 3209.436870] uhci_hcd 0000:00:1d.1: using default PCI settings
    [ 3209.436878] uhci_hcd 0000:00:1d.2: no hotplug settings from platform
    [ 3209.436879] uhci_hcd 0000:00:1d.2: using default PCI settings
    [ 3209.436887] uhci_hcd 0000:00:1d.3: no hotplug settings from platform
    [ 3209.436889] uhci_hcd 0000:00:1d.3: using default PCI settings
    [ 3209.436896] ehci-pci 0000:00:1d.7: no hotplug settings from platform
    [ 3209.436898] ehci-pci 0000:00:1d.7: using default PCI settings
    [ 3209.436905] pci 0000:00:1e.0: no hotplug settings from platform
    [ 3209.436907] pci 0000:00:1e.0: using default PCI settings
    [ 3209.436916] lpc_ich 0000:00:1f.0: no hotplug settings from platform
    [ 3209.436918] lpc_ich 0000:00:1f.0: using default PCI settings
    [ 3209.436926] ata_piix 0000:00:1f.2: no hotplug settings from platform
    [ 3209.436928] ata_piix 0000:00:1f.2: using default PCI settings
    [ 3209.436935] pci 0000:00:1f.3: no hotplug settings from platform
    [ 3209.436937] pci 0000:00:1f.3: using default PCI settings
    [ 3209.431344] Restarting tasks ... done.
    [ 3209.721290] r8169 0000:03:00.0 eth0: link down
    [ 3209.721326] IPv6: ADDRCONF(NETDEV_UP): eth0: link is not ready
    [ 3209.722296] r8169 0000:03:00.0 eth0: link down
    [ 3211.321962] r8169 0000:03:00.0 eth0: link up
    [ 3211.321977] IPv6: ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
    [ 3241.180044] Corrupted low memory at c000d2ec (d2ec phys) = 00004000
    [ 3241.180056] ------------[ cut here ]------------
    [ 3241.180068] WARNING: CPU: 0 PID: 3308 at /build/buildd/linux-3.13.0/arch/x86/kernel/check.c:140 check_for_bios_corruption+0xbe/0xd0()
    [ 3241.180071] Memory corruption detected in low memory
    [ 3241.180073] Modules linked in: bnep rfcomm bluetooth gpio_ich dm_multipath snd_hda_codec_hdmi scsi_dh snd_hda_codec_realtek coretemp snd_hda_intel snd_hda_codec binfmt_misc snd_hwdep serio_raw snd_pcm snd_page_alloc lpc_ich snd_seq_midi snd_seq_midi_event snd_rawmidi snd_seq snd_seq_device snd_timer snd soundcore parport_pc ppdev mac_hid lp parport dm_mirror dm_region_hash dm_log hid_generic usbhid hid radeon i2c_algo_bit ttm r8169 drm_kms_helper mii drm
    [ 3241.180134] CPU: 0 PID: 3308 Comm: kworker/0:2 Not tainted 3.13.0-37-generic #64-Ubuntu
    [ 3241.180137] Hardware name: Gigabyte Technology Co., Ltd. G31M-ES2C/G31M-S2C, BIOS F6 02/05/2009
    [ 3241.180143] Workqueue: events check_corruption
    [ 3241.180147] 00000000 00000000 e5ae7e8c c1653867 e5ae7ecc e5ae7ebc c105691e c182e64c
    [ 3241.180157] e5ae7ee8 00000cec c182e678 0000008c c1048d6e c1048d6e 00000000 c0010000
    [ 3241.180168] c1aaf8d0 e5ae7ed4 c1056973 00000009 e5ae7ecc c182e64c e5ae7ee8 e5ae7efc
    [ 3241.180178] Call Trace:
    [ 3241.180188] [<c1653867>] dump_stack+0x41/0x52
    [ 3241.180194] [<c105691e>] warn_slowpath_common+0x7e/0xa0
    [ 3241.180201] [<c1048d6e>] ? check_for_bios_corruption+0xbe/0xd0
    [ 3241.180207] [<c1048d6e>] ? check_for_bios_corruption+0xbe/0xd0
    [ 3241.180213] [<c1056973>] warn_slowpath_fmt+0x33/0x40
    [ 3241.180218] [<c1048d6e>] check_for_bios_corruption+0xbe/0xd0
    [ 3241.180224] [<c1048d90>] check_corruption+0x10/0x40
    [ 3241.180230] [<c106ec8b>] process_one_work+0x11b/0x3b0
    [ 3241.180236] [<c106cc45>] ? start_worker+0x25/0x30
    [ 3241.180241] [<c106f3cd>] ? manage_workers.isra.28+0x1ad/0x270
    [ 3241.180247] [<c106f909>] worker_thread+0xf9/0x380
    [ 3241.180252] [<c106f810>] ? rescuer_thread+0x380/0x380
    [ 3241.180258] [<c10750f1>] kthread+0xa1/0xc0
    [ 3241.180266] [<c1661b37>] ret_from_kernel_thread+0x1b/0x28
    [ 3241.180272] [<c1075050>] ? kthread_create_on_node+0x140/0x140
    [ 3241.180276] ---[ end trace eee1acfc397cedf2 ]---
    (rádugás után)

    a sudo sh flashtool.sh parancsra (jobb egeres művelet után, mert tzerminálba nem fogadta el) azt írja, hogy Can't open flashtool.sh

    Most akkor miért nerm indul és mit jelent az a sok sor, amit küldtem?

    But who is watching the guardians?

Új hozzászólás Aktív témák