Új hozzászólás Aktív témák
-
ABnormal
őstag
[link]
így néz ki -
ABnormal
őstag
[link] <--- sok-sok okosság biosmaceráláshoz....
-
ABnormal
őstag
soha ne floppyról frissíts...! elindítod a gépet pl ME indítólemezről,ez létrehoz egy RAMdrive-ot,majd a floppyról bemásolod a RAMdrive-on előzőleg létrehozz tetszőleges mappába a flashelő progit és *.bin azaz a bios file-t.
MD parancsal tudsz könyvtárat létrehozni,tételezzük fel,hogy a C: lesz az adott RAMdrive betűjele,ekkor C: majd
MD bios
COPY a:*.* c:\bios
CD bios -
ABnormal
őstag
lehet,hogy hülyeség...de én ezt tartom szem előtt (msi a forrás):
WARNING!!!!!
DON'T FLASH FROM A FLOPPY DISK!!!!
DON'T FLASH WHEN YOUR SYSTEM IS RUNNING FINE!!!!
DON'T FLASH IF YOU DON'T KNOW WHAT YOU ARE DOING!!!!
Flashing the BIOS for Non-FAT file system
1.Check your BIOS for BIOS FLASH DISABLED and ENABLE it, some boards have this function.For Example:
K7T266 Pro (MS-6380) -BIOS setup/chipset setup/BIOS protection/disabled
2.Know Your model number
a. Open your case and look for the MS-XXXX number on the motherboard between the PCI slots, also check the version number that is written there as well. (some motherboards are named like K7T Turbo, make sure you have the right version number)
b. Boot up your system & take a look at the top left screen during POST, you should see something like ''A6380MS v1.7 122101'' This means the board is MS-6380 with BIOS version 1.7
Hint: Many systems are clearing this message very fast, the bios version is then unreadable, you can either press “PAUSE” or disable the “Quick Boot” in the BIOS setup.
3.Download the BIOS that matches your motherboard AND version number (some motherboards are named like K7T Turbo, make sure you have the right version number). BIOS can be found according to the CPU type of your board like if your CPU is Intel P4 478 type then look here
<http://www.msi.com.tw/support/bios/socket_478.php>
if you cannot find the BIOS that matches your board, try here <http://www.msi.com.tw/support/bios/more.php>
4.Extract the file you have downloaded to a floppy (not the win ME/98 startup floppy) by double clocking the file in windows mode and supplying the path a:\
5.Boot the computer using a windows ME or windows 98 startup disk. It must be one of these! A plain boot disk will not be good enogh.
If you do not have Windows ME or 98 to create the floppy you can make one on a friend's computer.
6.When boot is done there will be a message on the screen showing :''Diagnostic tools were successfully loaded to drive'' followed by a single letter.
This letter is the leter assigned to the RAMDRIVE. This RAMDRIVE is a virtual drive in the system memory and can be accessed and controlled like any other drive with DOS commands such as:
MD - Make Directory
Copy - copy a file
Deleate - Deleate a file
There is one important difference which is that being in the system memory this drive is wiped once the computer is restarted or shut down.
7.Replace the startup floppy with the one containing the flash utility and bios ROM files previously extracted in windows.
8.Copy the 2 files to the RAMDRIVE by using the DOS command copy.
Here is an example, in this example the flash utility is AWFL814B.EXE ,the ROM file is w6373nms.220 and the RAMDRIVE letter assignment is D
copy awfl814b.exe d:\
copy w6337nms.220 d:\
9.Change the current working directory to the RAMDRIVE root directory, with the example case of the RAMDRIVE being drive D this is done by simply done with the command d:
10.Execute the flash utility with the ROM file as a command line argument, with this example:
awfl814b w6373nms.220
If you wish to save the current bios you must specify the full path a:\filename. Specifying only a file name will save the bios to the RAMDRIVE which will be wiped after restarting the computer and the file will not be saved.
a:\bios.old is an example of the correct way to save the bios.
11.Reboot your system when prompted
12. If your system doesn't boot after you flashed, please refer to the BIOS recovery method as described
[Szerkesztve] -
-
ABnormal
őstag
válasz small devil #54 üzenetére
A távoli kiszolgáló nem található.
-
ABnormal
őstag
meg lehet azt csinálni,hogy a bios ne annak ismerje fel a procimat mint ami valójában?
-
ABnormal
őstag
ASUS EZ DIY
ASUS CrashFree BIOS 3
The ASUS CrashFree BIOS 3 allows users to restore corrupted BIOS data from a USB flash disk containing the BIOS file. This utility saves users the cost and hassle of buying a replacement BIOS chip.
ASUS EZ Flash 2
EZ Flash 2 is a user-friendly BIOS update utility. Simply press the pre-defined hotkey to launch this tool and update BIOS from a USB flash disk before entering the OS. You can update your BIOS only in a few clicks without preparing an additional floppy diskette or using an OS-based flash utility. -
ABnormal
őstag
erre semmi szükség szerintem,nem kell hot-swap -os bios chip csere...
szerintem próbáld meg azt,hogy a bios file-t kirakod egy pendrive-ra,kiszedsz minden fölösleges kártyát,vinyot és optikait a gépedből,csak a vga,proci és 1db memoria marad benne és a pendrive,majd elindítod a gépet és imádkozol...mivel nem tud indulni semmiről és a bios is hibás reméljük,hogy beindul az ASUS CrashFree és be flash-eli a pendrive-ról a bios file-t...
Új hozzászólás Aktív témák
- Beszámítás! ASRock Fatality Z170 Gaming K4 alaplap garanciával hibátlan működéssel
- Garanciális ASUS ROG STRIX Z790-H GAMING WIFI Alaplap
- Asrock alaplapok jóárasítva, B660, H670, Z690 Frissítve 2024.04.27
- 96GB (2x48GB) Crucial Pro DDR5 kit/ új, bontatlan/
- Beszámítás! Gigabyte GA-H81M-HD3 alaplap garanciával hibátlan működéssel