Új hozzászólás Aktív témák

• #31392 AiRLAC addikt

  Új Válasz 2017-06-15 20:26:38 #31392

  Új hozzászólás

  Összes hozzászólása itt Válaszok az összes hozzászólására itt Válaszok erre a hozzászólásra

  Privát üzenet küldése

  

  AiRLAC

  addikt

  Végre elővettem a kb. 1 éve tégla DS209-em, pár kávéval és pár órával később már 211j-ként bootol és DSM 6.1.2-15132 fut rajta Lett pár plusz ősz hajszálam, de ha valaki ilyesmibe fogna akkor tudok már tanácsokat adni

  Valamint az 5TB-os Seagate HDD is működik benne gond nélkül

  __ __ _ _
| \/ | __ _ _ ____ _____| | |
| |\/| |/ _` | '__\ \ / / _ \ | |
| | | | (_| | | \ V / __/ | |
|_| |_|\__,_|_| \_/ \___|_|_|
_ _ ____ _
| | | | | __ ) ___ ___ | |_
| | | |___| _ \ / _ \ / _ \| __|
| |_| |___| |_) | (_) | (_) | |_
\___/ |____/ \___/ \___/ \__| ** LOADER **
** MARVELL BOARD: Synology Disk Station LE

U-Boot 1.1.4 (Nov 16 2009 - 14:44:11) Marvell version: 3.4.4

U-Boot code: 00600000 -> 0067FFF0 BSS: -> 0068B3B4

Soc: 88F6281 A1 (DDR2)
CPU running @ 1200Mhz L2 running @ 480Mhz
SysClock = 400Mhz , TClock = 200Mhz

DRAM CAS Latency = 5 tRP = 5 tRAS = 18 tRCD=6
DRAM CS[0] base 0x00000000 size 128MB
DRAM CS[1] base 0x08000000 size 128MB
DRAM Total size 256MB 16bit width
[4096kB@f8000000] Flash: 4 MB
Addresses 8M - 0M are saved for the U-Boot usage.
Mem malloc Initialization (8M - 7M): Done
Using default environment


CPU : Marvell Feroceon (Rev 1)

Streaming disabled
Write allocate disabled

Module 1 is AUDIO

USB 0: host mode

Synology Model: DS209
Fan Status: Good

Net: egiga0 [PRIME]
Hit any key to stop autoboot: 0
## Booting image at f8080000 ...
Image Name: Linux-2.6.32.12
Image Type: ARM Linux Kernel Image (uncompressed)
Data Size: 1551424 Bytes = 1.5 MB
Load Address: 00008000
Entry Point: 00008000
Verifying Checksum ... OK
OK
## Loading Ramdisk Image at f8280000 ...
Image Name: synology_88f6281_211j 15132
Image Type: ARM Linux RAMDisk Image (gzip compressed)
Data Size: 1029844 Bytes = 1005.7 kB
Load Address: 00800000
Entry Point: 00800000
Verifying Checksum ... OK

Starting kernel ...

Uncompressing Linux... done, booting the kernel.
[ 0.000000] Linux version 2.6.32.12 (root@build4) (gcc version 4.6.4 (Marvell GCC release 20150204-c4af733b 64K MAXPAGESIZE ALIGN CVE-2015-0235) ) #15132 Wed Jun 14 12:24:38 CST 2017
[ 0.000000] CPU: Feroceon 88FR131 [56251311] revision 1 (ARMv5TE), cr=00053977
[ 0.000000] CPU: VIVT data cache, VIVT instruction cache
[ 0.000000] Machine: Feroceon-KW
[ 0.000000] Using UBoot passing parameters structure
[ 0.000000] Sys Clk = 200000000, Tclk = 166666667
[ 0.000000] Synology Board ID: 21
[ 0.000000] Memory policy: ECC disabled, Data cache writeback
[ 0.000000] Built 1 zonelists in Zone order, mobility grouping off. Total pages: 65024
[ 0.000000] Kernel command line: console=ttyS0,115200 ip=off initrd=0x00800040,4M root=/dev/md0 rw syno_hw_version=DS209v10 ihd_num=2 netif_num=1
[ 0.000000] Synology Hardware Version: DS209v10-j
[ 0.000000] Internal HD num: 2
[ 0.000000] Internal netif num: 1
[ 0.000000] PID hash table entries: 1024 (order: 0, 4096 bytes)
[ 0.000000] Dentry cache hash table entries: 32768 (order: 5, 131072 bytes)
[ 0.000000] Inode-cache hash table entries: 16384 (order: 4, 65536 bytes)
[ 0.000000] Memory: 128MB 128MB = 256MB total
[ 0.000000] Memory: 244992KB available (3652K code, 519K data, 124K init, 0K highmem)
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:128
[ 0.000000] Console: colour dummy device 80x30
[ 0.000000] Calibrating delay loop... 1192.75 BogoMIPS (lpj=5963776)
[ 0.240000] Mount-cache hash table entries: 512
[ 0.240000] CPU: Testing write buffer coherency: ok
[ 0.240000] devtmpfs: initialized
[ 0.240000] xor: measuring software checksum speed
[ 0.290000] arm4regs : 1086.000 MB/sec
[ 0.340000] 8regs : 651.600 MB/sec
[ 0.390000] 32regs : 841.200 MB/sec
[ 0.390000] xor: using function: arm4regs (1086.000 MB/sec)
[ 0.390000] NET: Registered protocol family 16
[ 0.390000] Feroceon L2: Enabling L2
[ 0.390000] Feroceon L2: Cache support initialised, in WT override mode.
[ 0.400000]
[ 0.400000] CPU Interface
[ 0.400000] -------------
[ 0.400000] SDRAM_CS0 ....base 00000000, size 128MB
[ 0.400000] SDRAM_CS1 ....base 08000000, size 128MB
[ 0.400000] SDRAM_CS2 ....disable
[ 0.400000] SDRAM_CS3 ....disable
[ 0.400000] PEX0_MEM ....base e0000000, size 128MB
[ 0.400000] PEX0_IO ....base f2000000, size 1MB
[ 0.400000] PEX1_MEM ....no such
[ 0.400000] PEX1_IO ....no such
[ 0.400000] INTER_REGS ....base f1000000, size 1MB
[ 0.400000] NFLASH_CS ....base fa000000, size 2MB
[ 0.400000] SPI_CS ....base f4000000, size 16MB
[ 0.400000] BOOT_ROM_CS ....no such
[ 0.400000] DEV_BOOTCS ....no such
[ 0.400000] CRYPT_ENG ....base f0000000, size 2MB
[ 0.400000] Detected Tclk 200000000 and SysClk 400000000
[ 0.400000] Synology 6281 1, 2 bay GPIO Init
[ 0.400000]
[ 0.400000] Warning PCI-E is Powered Off
[ 0.410000] bio: create slab <bio-0> at 0
[ 0.410000] vgaarb: loaded
[ 0.410000] SCSI subsystem initialized
[ 0.580000] raid6: int32x1 101 MB/s
[ 0.750000] raid6: int32x2 146 MB/s
[ 0.920000] raid6: int32x4 135 MB/s
[ 1.090000] raid6: int32x8 146 MB/s
[ 1.090000] raid6: using algorithm int32x8 (146 MB/s)
[ 1.090000] Switching to clocksource kw_clocksource
[ 1.090000] NET: Registered protocol family 2
[ 1.090000] IP route cache hash table entries: 2048 (order: 1, 8192 bytes)
[ 1.090000] TCP established hash table entries: 8192 (order: 4, 65536 bytes)
[ 1.090000] TCP bind hash table entries: 8192 (order: 3, 32768 bytes)
[ 1.090000] TCP: Hash tables configured (established 8192 bind 8192)
[ 1.090000] TCP reno registered
[ 1.090000] NET: Registered protocol family 1
[ 1.090000] RPC: Registered udp transport module.
[ 1.090000] RPC: Registered tcp transport module.
[ 1.090000] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 1.090000] Trying to unpack rootfs image as initramfs...
[ 2.410000] rootfs image is not initramfs (no cpio magic); looks like an initrd
[ 2.420000] Freeing initrd memory: 4096K
[ 2.420000] XOR registered 4 channels
[ 2.420000] XOR 2nd invalidate WA enabled
[ 2.420000] VFS: Disk quotas dquot_6.5.2
[ 2.420000] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes)
[ 2.420000] msgmni has been set to 486
[ 2.420000] alg: No test for md5 (md5-generic)
[ 2.420000] alg: No test for des (des-generic)
[ 2.420000] alg: No test for des3_ede (des3_ede-generic)
[ 2.420000] alg: No test for stdrng (krng)
[ 2.420000] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 254)
[ 2.420000] io scheduler noop registered
[ 2.420000] io scheduler anticipatory registered (default)
[ 2.430000] Serial: 8250/16550 driver, 4 ports, IRQ sharing disabled
[ 2.430000] serial8250.0: ttyS0 at MMIO 0xf1012000 (irq = 33) is a 16550A
[ 2.440000] console [ttyS0] enabled
[ 2.450000] serial8250.1: ttyS1 at MMIO 0xf1012100 (irq = 34) is a 16550A
[ 2.460000] brd: module loaded
[ 2.470000] sata_mv sata_mv.0: version 1.28
[ 2.470000] sata_mv sata_mv.0: slots 32 ports 2
[ 2.470000] scsi0 : sata_mv
[ 2.480000] scsi1 : sata_mv
[ 2.480000] ata1: SATA max UDMA/133 irq 21
[ 2.490000] ata2: SATA max UDMA/133 irq 21
[ 2.840000] ata1: SATA link down (SStatus 0 SControl F300)
[ 5.840000] Delay 5 seconds to wait for disk 2 ready.
[ 16.390000] ata2: link is slow to respond, please be patient (ready=0)
[ 20.890000] ata2: SRST failed (errno=-16)
[ 20.890000] ata2: SRST fail, set srst fail flag
[ 24.640000] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl F300)
[ 24.640000] ata2: link reset sucessfully clear error flags
[ 24.730000] ata2.00: ATA-9: ST5000DM000-1FK178, CC44, max UDMA/133
[ 24.730000] ata2.00: 9767541168 sectors, multi 0: LBA48 NCQ (depth 31/32)
[ 24.820000] ata2.00: configured for UDMA/133
[ 24.840000] scsi 1:0:0:0: Direct-Access ATA ST5000DM000-1FK178 CC44 PQ: 0 ANSI: 5
[ 24.840000] sd 1:0:0:0: [sdb] 9767541168 512-byte logical blocks: (5.00 TB/4.54 TiB)
[ 24.850000] sd 1:0:0:0: [sdb] 4096-byte physical blocks
[ 24.860000] sd 1:0:0:0: [sdb] Write Protect is off
[ 24.860000] sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 24.870000] sdb: sdb1 sdb2 sdb5
[ 24.930000] sd 1:0:0:0: [sdb] Attached SCSI disk
[ 24.940000] physmap platform flash device: 00400000 at f8000000
[ 24.940000] SPI Serial flash detected @ 0xf8000000, 4096KB (64sec x 64KB)
[ 24.950000] Searching for RedBoot partition table in SYNOMTD-0 at offset 0x3f0000
[ 24.970000] 6 RedBoot partitions found on MTD device SYNOMTD-0
[ 24.980000] SYNOMTD flash bank 0: Using RedBoot partition definition
[ 24.990000] Creating 6 MTD partitions on "SYNOMTD-0":
[ 24.990000] 0x000000000000-0x000000080000 : "RedBoot"
[ 25.000000] 0x000000080000-0x000000280000 : "zImage"
[ 25.000000] 0x000000280000-0x0000003c0000 : "rd.gz"
[ 25.010000] 0x0000003c0000-0x0000003d0000 : "vendor"
[ 25.010000] vender Mac1 checksum error ucSum:0x00 Buf:0x00 Sum:0.
[ 25.020000] vender Mac2 checksum error ucSum:0x00 Buf:0x00 Sum:0.
[ 25.030000] vender Mac3 checksum error ucSum:0x00 Buf:0x00 Sum:0.
[ 25.030000] serial number='A1G4N00124'
[ 25.040000] 0x0000003d0000-0x0000003f0000 : "RedBoot Config"
[ 25.040000] 0x0000003f0000-0x000000400000 : "FIS directory"
[ 25.050000] mvCpuIfTargetWinBaseLowGet:ERR. Getting target 11 failed.
[ 25.050000] mvCpuIfTargetWinSizeGet:ERR. Getting target 11 failed.
[ 25.060000]
[ 25.060000] ERROR: flashInfoFill - Failed to get Device Base address and Size (spi_flash 0)Loading Marvell Ethernet Driver:
[ 25.070000] o Cached descriptors in DRAM
[ 25.080000] o DRAM SW cache-coherency
[ 25.080000] o 2 Giga ports supported
[ 25.090000] o Single RX Queue support - ETH_DEF_RXQ=0
[ 25.090000] o Single TX Queue support - ETH_DEF_TXQ=0
[ 25.100000] o TCP segmentation offload (TSO) supported
[ 25.100000] o Receive checksum offload supported
[ 25.110000] o Transmit checksum offload supported
[ 25.110000] o SKB Recycle supported - (Enabled)
[ 25.120000] o Rx descripors: q0=128
[ 25.120000] o Tx descripors: q0=532
[ 25.120000] o Loading network interface(s):
[ 25.130000] o register under mv88fx_eth platform
[ 25.130000] o eth0, ifindex = 2, GbE port = 0
[ 25.140000] o eth0, phy chipid = 1410e40, Support WOL = 0
[ 25.140000]
[ 25.150000] md: linear personality registered for level -1
[ 25.150000] md: raid0 personality registered for level 0
[ 25.160000] md: raid1 personality registered for level 1
[ 25.160000] md: raid10 personality registered for level 10
[ 25.170000] md: raid6 personality registered for level 6
[ 25.170000] md: raid5 personality registered for level 5
[ 25.180000] md: raid4 personality registered for level 4
[ 25.180000] device-mapper: ioctl: 4.15.0-ioctl (2009-04-01) initialised: dm-devel@redhat.com
[ 25.190000] cpuidle: using governor ladder
[ 25.200000] TCP cubic registered
[ 25.200000] NET: Registered protocol family 17
[ 25.210000] NET: Registered protocol family 15
[ 25.210000] registered taskstats version 1
[ 25.210000] md: Waiting for all devices to be available before autodetect
[ 25.220000] md: If you don't use raid, use raid=noautodetect
[ 25.230000] md: Autodetecting RAID arrays.
[ 25.390000] md: invalid raid superblock magic on sdb5
[ 25.400000] md: sdb5 does not have a valid v0.90 superblock, not importing!
[ 25.410000] md: Scanned 3 and added 2 devices.
[ 25.410000] md: autorun ...
[ 25.410000] md: considering sdb1 ...
[ 25.420000] md: adding sdb1 ...
[ 25.420000] md: sdb2 has different UUID to sdb1
[ 25.420000] md: created md0
[ 25.430000] md: bind<sdb1>
[ 25.430000] md: running: <sdb1>
[ 25.430000] raid1: raid set md0 active with 1 out of 2 mirrors
[ 25.440000] md0: detected capacity change from 0 to 2549940224
[ 25.450000] md: considering sdb2 ...
[ 25.450000] md: adding sdb2 ...
[ 25.450000] md: created md1
[ 25.460000] md: bind<sdb2>
[ 25.460000] md: running: <sdb2>
[ 25.460000] raid1: raid set md1 active with 1 out of 2 mirrors
[ 25.470000] md1: detected capacity change from 0 to 2147418112
[ 25.470000] md: ... autorun DONE.
[ 25.480000] RAMDISK: lzma image found at block 0
[ 26.880000] VFS: Mounted root (ext2 filesystem) on device 1:0.
START /linuxrc.syno
Insert basic USB modules...
:: Loading module usbcore[ 27.210000] usbcore: registered new interface driver usbfs
[ 27.210000] usbcore: registered new interface driver hub
[ 27.240000] usbcore: registered new interface driver ethub
[ 27.250000] usbcore: registered new device driver usb
... [ OK ]
:: Loading module ehci-hcd[ 27.330000] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 27.340000] orion-ehci orion-ehci.0: Marvell Orion EHCI
[ 27.350000] orion-ehci orion-ehci.0: new USB bus registered, assigned bus number 1
[ 27.380000] orion-ehci orion-ehci.0: irq 19, io mem 0xf1050000
[ 27.400000] orion-ehci orion-ehci.0: USB 2.0 started, EHCI 1.00
[ 27.400000] usb usb1: configuration #1 chosen from 1 choice
[ 27.430000] hub 1-0:1.0: USB hub found
[ 27.430000] hub 1-0:1.0: 1 port detected
... [ OK ]
:: Loading module ohci-hcd[ 27.570000] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
... [ OK ]
:: Loading module xhci-hcd ... [ OK ]
Insert net driver(Mindspeed only[ 27.760000] usb 1-1: new high speed USB device using orion-ehci and address 2
)...
[ 27.770000] ds211j_synobios: module license 'Synology Inc.' taints kernel.
[ 27.770000] Disabling lock debugging due to kernel taint
[ 27.800000] correction with 0x00
[ 27.870000] 2014-52-90 12:108:60 UTC
[ 27.870000] synobios: load, major number 201
[ 27.880000] Brand: Synology
[ 27.880000] Model: DS-211j
[ 27.880000] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 27.890000] synobios cpu_arch proc entry initialized
[ 27.900000] synobios crypto_hw proc entry initialized
[ 27.900000] synobios syno_platform proc entry initialized
Starting /usr/syno/bin/synocfgen...
/usr/syno/bin/synocfgen returns 0
[ 27.940000] synobios: unload
[ 28.000000] Got empty serial number. Generate serial number from product.
[ 28.000000] usb 1-1: configuration #1 chosen from 1 choice
[ 28.030000] hub 1-1:1.0: USB hub found
[ 28.030000] hub 1-1:1.0: 4 ports detected
Partition Version=7
/sbin/e2fsck exists, checking /dev/md0...
[ 28.080000] md0: unknown partition table

23808 inodes used (15.30%, out of 155648)
16 non-contiguous files (0.1%)
7 non-contiguous directories (0.0%)
# of inodes with ind/dind/tind blocks: 0/0/0
Extent depth histogram: 22672/1
190563 blocks used (30.61%, out of 622544)
0 bad blocks
1 large file

19722 regular files
2663 directories
2 character device files
0 block device files
0 fifos
1229 links
1412 symbolic links (1124 fast symbolic links)
0 sockets
------------
25028 files
/sbin/e2fsck returns 0
Mounting /dev/md0 /tmpRoot
[ 30.580000] EXT4-fs (md0): barriers disabled
[ 30.600000] EXT4-fs (md0): mounted filesystem with ordered data mode
------------upgrade
Begin upgrade procedure
No upgrade file exists
End upgrade procedure
============upgrade
Wait 2 seconds for synology manufactory device
Fri Jul 6 13:49:05 UTC 2018
/dev/md0 /tmpRoot ext4 rw,relatime,user_xattr,barrier=0,journal_checksum,data=ordered 0 0
sys /sys sysfs rw,relatime 0 0
/dev/root.old / ext2 rw,relatime,errors=continue,user_xattr 0 0
none /dev devtmpfs rw,relatime,size=122604k,nr_inodes=30651,mode=755 0 0
proc /proc proc rw,relatime 0 0
linuxrc.syno executed successfully.
[ 33.030000] EXT3-fs: md0: couldn't mount because of unsupported optional features (240).
[ 33.030000] EXT2-fs: md0: couldn't mount because of unsupported optional features (240).
[ 33.110000] EXT4-fs (md0): barriers disabled
[ 33.130000] EXT4-fs (md0): mounted filesystem with ordered data mode
[ 33.130000] VFS: Mounted root (ext4 filesystem) on device 9:0.
[ 33.140000] Trying to move old root to /initrd ... okay
[ 33.200000] Freeing init memory: 124K
[ 39.400000] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 40.130000] md1: unknown partition table
[ 40.420000] Adding 2097080k swap on /dev/md1. Priority:-1 extents:1 across:2097080k
==================== start udevd ====================
[ 43.110000] NET: Registered protocol family 10
[ 43.110000] lo: Disabled Privacy Extensions
[ 43.180000] IPv6 over IPv4 tunneling driver
[ 43.190000] sit0: Disabled Privacy Extensions
[ 44.660000] init: syno-auth-check main process (1183) killed by TERM signal
[ 45.460000] <30>systemd-udevd[1295]: starting version 204
===== trigger device plug event =====
[ 46.940000] cpufreq: Init kirkwood cpufreq driver
[ 49.250000] alg: No test for aes (aes-generic)
[ 49.850000] alg: No test for stdrng (ansi_cprng)
[ 50.390000] alg: No test for crc32c (crc32c-generic)
[ 51.530000] cesadev_init(bf18f000)
[ 51.660000] mvCesaInit: sessions=10240, queue=64, pSram=f0000000
[ 52.160000] alg: No test for sha1 (sha1-generic)
[ 52.270000] alg: No test for sha224 (sha224-generic)
[ 52.270000] alg: No test for sha256 (sha256-generic)
[ 52.350000] alg: No test for sha384 (sha384-generic)
[ 52.370000] alg: No test for sha512 (sha512-generic)
[ 52.580000] encryptfs using the OCF package.
[ 54.170000] alg: No test for arc4 (arc4-generic)
[ 54.640000] fuse init (API version 7.13)
[ 55.670000] sky2 driver version 1.25
[ 56.000000] correction with 0x00
[ 56.060000] 2014-256-8 12:108:60 UTC
[ 56.070000] synobios: load, major number 201
[ 56.070000] Brand: Synology
[ 56.070000] Model: DS-211j
[ 56.080000] This is default settings: set group disks wakeup number to 1, spinup time deno 1
[ 56.090000] synobios cpu_arch proc entry initialized
[ 56.090000] synobios crypto_hw proc entry initialized
[ 56.100000] synobios syno_platform proc entry initialized
[ 57.950000] eth0: mac address changed
[ 60.410000] eth0: link down
[ 60.410000] eth0: started
[ 60.430000] ADDRCONF(NETDEV_UP): eth0: link is not ready
[ 62.100000] eth0: link up, full duplex, speed 1 Gbps
[ 62.110000] ADDRCONF(NETDEV_CHANGE): eth0: link becomes ready
[ 64.110000] init: dhcp-client (eth0) main process (2958) killed by TERM signal
[ 70.770000] init: dhcp-client (eth0) main process (3129) killed by TERM signal
[ 72.410000] md: md3 stopped.
[ 72.540000] md: bind<sdb5>
[ 72.560000] raid1: raid set md3 active with 1 out of 1 mirrors
[ 72.560000] md3: detected capacity change from 0 to 4996132503552
[ 72.610000] md3: unknown partition table
[ 78.780000] EXT4-fs (dm-0): barriers disabled
[ 79.140000] EXT4-fs (dm-0): mounted filesystem with writeback data mode
[ 89.420000] Initializing USB Mass Storage driver...
[ 89.420000] usbcore: registered new interface driver usb-storage
[ 89.430000] USB Mass Storage support registered.
[ 89.640000] usbcore: registered new interface driver usblp
[ 90.190000] usbcore: registered new interface driver hiddev
[ 90.190000] usbcore: registered new interface driver usbhid
[ 90.200000] usbhid: v2.6:USB HID core driver

DS211j login: [ 96.580000] ata2.00: configured for UDMA/133
[ 96.580000] ata2: EH complete
[ 98.620000] loop: module loaded
[ 101.930000] Slow work thread pool: Starting up
[ 102.730000] Slow work thread pool: Ready
[ 123.390000] findhostd uses obsolete (PF_INET,SOCK_PACKET)
[ 126.760000] ata2.00: configured for UDMA/133
[ 126.760000] ata2: EH complete
[ 130.380000] iSCSI: init_io_buffer_head(833) LUN-backup: 512 buffers allocated, total 2097152 bytes successfully

  "After successfully ignoring Google, FAQ's, the board search and leaving a undecipherable post in the wrong sub-forum don't expect an intelligent reply."

Új hozzászólás Aktív témák